Torrent AWD V6-3.4L VIN F (2006)
1. Install the upper attachment bolt into the APP assembly.
2. Install the APP assembly into the vehicle.
3. Install the remaining attachment bolts into the APP assembly.
Tighten the bolts to 25 N.m (18 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Connect the APP sensor harness connector. Push the connector in until the lock position is felt, then pull back to confirm engagement.
5. Install the CPA to the APP sensor harness connector.
6. Install the instrument panel left lower closeout panel.
