Torrent AWD V6-3.4L VIN F (2006)
It is important to mark both gray wires before cutting off the EGR valve harness connector. Follow the wiring schematic in this bulletin to ensure a
proper repair. Incorrect installation of the EGR valve harness connector will cause EGR valve DTCs to set with incorrect scan tool EGR data parameter
readings. If you encounter this condition, check your wiring repair to the EGR valve harness connector. Do not replace the PCM or the EGR valve.
Installation Instruction Sheet
You may have received the incorrect installation instruction sheet for the EGR retrofit kit. It is very important to check the revision date on the
instruction sheet before attempting this repair.
There are three instruction sheets in one. Use the one on the top left corner. The revision date can be found on the lower left corner of your copy. Please
discard any copy that does not have the following revision date of 03FE06
If the revision date cannot be determined, then look at the EGR valve connector end view schematic on your copy of the instruction sheet for the
following.
If the illustration callout shows A-E , your instruction sheet is incorrect.
If the illustration callout shows E-A , your instruction sheet is correct.
Parts Information
Warranty Information
