pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 13699 > < SIR Disabling and Enabling Zones|Page 13697
Page 7
background image

10. Connect the SIS - LF (1) to the vehicle harness connector (3) and install the CPA (2).
11. Install the lower center pillar trim.

12. Install the AIR BAG fuse into the body control module fuse center.
13. Install the body control module fuse center cover.
14. Use caution while reaching in and turn the ignition switch to the ON position.The AIR BAG indicator will flash then turn OFF.
15. Perform the SIR Diagnostic System Check if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System Check -

Vehicle in Vehicle DTC Information.

SIR Disabling and Enabling Zone 3

SIR DISABLING AND ENABLING ZONE 3

DISABLING PROCEDURE

1. Turn the steering wheel so that the vehicles wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.

SIR Disabling and Enabling Zones|Page 13699 > < SIR Disabling and Enabling Zones|Page 13697