pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 13700 > < SIR Disabling and Enabling Zones|Page 13698
Page 8
background image

3. Remove the key from the ignition switch.
4. Locate the body control module fuse center then remove the fuse center cover.

5. Locate and remove the AIR BAG fuse from the body control module fuse center.

IMPORTANT:  With the AIR BAG fuse removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is
normal operation, and does not indicate an SIR system malfunction.

6. Remove the connector position assurance (CPA) from the steering wheel module coil connector.
7. Disconnect the steering wheel module coil connector from the vehicle harness connector.

ENABLING PROCEDURE

1. Remove the key from the ignition switch.

SIR Disabling and Enabling Zones|Page 13700 > < SIR Disabling and Enabling Zones|Page 13698