pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 13708 > < SIR Disabling and Enabling Zones|Page 13706
Page 16
background image

3. Remove the key from the ignition switch.
4. Locate the body control module fuse center. Remove the fuse center cover.

5. Locate and remove the AIR BAG fuse from the body control module fuse center.

IMPORTANT:  With the AIR BAG fuse removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is
normal operation, and does not indicate an SIR system malfunction.

6. Remove the upper rear window molding.
7. Remove both the left and right rear corner garnish moldings.
8. Remove the rear headliner push-in retainers.
9. Remove the rear coat hooks.

10. Gently pull down the right rear corner to access the roof rail module - right connector.
11. Remove the connector position assurance (CPA) from the roof rail module - right connector.
12. Disconnect the roof rail module - right connector from the vehicle harness connector.

SIR Disabling and Enabling Zones|Page 13708 > < SIR Disabling and Enabling Zones|Page 13706