Torrent AWD V6-3.4L VIN F (2006)
1. Position the shoulder belt retractor into the center pillar positioning unit with the locking tab in the body structure notch.
IMPORTANT: Apply Permatex(R) 24200 on all restraint fasteners prior to installation.
2. Install the retractor fastener.
Tighten the fastener to 45 N.m (33 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Snap the shoulder belt webbing retainer into the center pillar.
4. Install the lower garnish molding into the center pillar.
5. Install the seat belt to the seat assembly
