Torrent AWD V6-3.4L VIN F (2006)
6. Loosely install the strut shaft nut.
7. Notice: Do not allow the front strut stud to rotate during disassembly/reassembly. Use hand tools to keep the strut stud from rotating. If air tools
are used, and the stud is allowed to rotate, damage to the strut may occur.
Notice: Refer to Fastener Notice in Service Precautions.
Hold the strut shaft and use the J 42991 or equivalent hand tools to tighten the shaft while verifying that the upper spring seat flats align with the
top mount.
^
Tighten the strut shaft to 75 Nm (55 ft. lbs.).
8. Release the tension on the J 45400.
9. Remove the strut assembly from the J 45400.
