Torrent AWD V6-3.4L VIN F (2006)
11. Place a brass drift against the CV joint inner race (1).
12. Tap gently on the brass drift with a hammer in order to tilt the joint race.
13. Remove the first bearing roller (2) when the CV race tilts.
14. Tilt the CV joint inner race in the opposite direction to remove the opposing bearing roller.
15. Repeat the process to remove all 6 of the bearing rollers.
16. Pivot the CV joint cage (4) and the inner race 90 degrees to the centerline of the outer race (2). At the same time, align the cage windows (3) with
the lands of the outer race.
17. Lift out the cage (4) and the inner race.
