Torrent AWD V6-3.4L VIN F (2006)
2. Install the J 44394 to the wheel drive shaft oil seal.
3. Install the wheel drive shaft to the output shaft:
^
Guide the wheel drive shaft tripot joint squarely onto the output shaft.
^
After the splined end of the wheel drive shaft passes the oil seal, remove the J 44394 from the oil seal.
^
Firmly engage the wheel drive shaft to the output shaft.
^
Ensure that the tripot joint is fully seated on the output shaft by grasping the tripot joint and attempting to pull free of the output shaft.
4. Insert the constant velocity (CV) joint spindle to the wheel hub/bearing assembly of the steering knuckle.
5. Hand install a new wheel drive shaft spindle nut.
