Torrent AWD V6-3.4L VIN F (2006)
5. Angle the washer solvent container to the rear of the vehicle and pull out of the mounting hole.
6. Disconnect the washer pump electrical connector.
7. Pull the washer solvent pump from the solvent container.
IMPORTANT: Contain any solvent the may spill while removing pump and hoses.
8. Disconnect the front and rear washer solvent hoses from the washer pump.
INSTALLATION PROCEDURE
1. Connect the front and rear washer solvent hoses to the washer pump.
IMPORTANT: Do not reuse washer solvent as debris may clog the system.
2. Install the washer pump into the washer solvent container. Ensure the washer pump filter is installed, if removed.
3. Connect the washer pump electrical connector.
4. Insert the front and rear washer solvent container hoses into the grooves in the solvent container.
5. Install the washer solvent container into the motor compartment. Ensure that the washer solvent container's mounting peg, with grommet installed,
is seated into the mounting hole in the body structure. A lubricant may be used to ease installation.
IMPORTANT: Washer solvent container grommet must be installed between container and body structure to prevent squeaks and rattles.
6. Connect the front washer solvent container hose to front nozzle hose that runs along the upper motor compartment rail.
