Torrent AWD V6-3.6L (2008)
7. Adjust the seat back until the hook end of the springs are adjacent to the adjuster pins.
8. Using a pair of channel lock(R) pliers, slide the springs from the notches in the frame to the pin.
9. Adjust the seat back to ensure proper operation.
10. If the seat is equipped with lumbar support, perform the following procedure:
1. Pull back on the lumbar cable sleeve.
2. Install the barrel end of the cable from the lumbar actuator.
3. Adjust the knob to ensure that the cable is properly installed.
11. Install the seat back trim cover and pad.
12. Install the front seat to the vehicle.
Rear Seat Recliner Replacement
Rear Seat Recliner Replacement