Torrent AWD V6-3.6L (2008)
7. Remove the brake hose fitting bolt from the brake caliper.
8. Remove the brake hose bracket retaining bolt.
9. Remove the brake hose from the brake caliper.
10. Remove and discard the copper brake hose gaskets. These gaskets may be stuck to the brake caliper and/or the brake hose end.
11. Cap or plug the opening in the brake caliper and the brake hose to prevent fluid loss and contamination.
Installation Procedure
1. Remove the caps or plugs from the opening in the brake caliper and the brake hose.
Important: Install NEW copper brake hose gaskets.
2. Assemble the NEW copper brake hose gaskets, and the brake hose bolt, to the brake hose.
Notice: Refer to Fastener Notice .
3. Install the brake hose fitting bolt to the brake caliper.
Tighten the bolt to 52 N.m (38 lb ft).
4. Install the front brake hose bracket retaining bolt.
Tighten the bolt to 12 N.m (106 lb in).
