Torrent AWD V6-3.6L (2008)
1. Inspect the windshield defrost duct seals. If damaged, replace using Kent Industries adhesive back foam tape P/N 46485 or equivalent.
2. Install the windshield defrost duct to the HVAC module.
3. Install the instrument panel upper trim panel.
Air Inlet Assembly Replacement
Air Inlet Assembly Replacement
Removal Procedure
1. Remove the HVAC module.
2. Disconnect the electrical connector from the recirculation actuator.
3. Remove the recirculation actuator screws.
4. Remove the recirculation actuator.