Torrent AWD V6-3.6L (2008)
3. Remove the strut to knuckle nuts and bolts. Discard the nuts and bolts.
4. If the strut has not been previously modified, perform the following procedure:
1. Disconnect the strut from the knuckle.
Important:
*
Maximum outboard adjustment-(increased negative camber) 2.0 mm of outboard elongation or to within 11.0 mm from outboard
edge of lower strut clevis bracket, whichever comes first
*
Maximum inboard adjustment-(increased positive camber) 4.0 mm of inboard elongation
*
If filing the strut, paint the exposed metal with primer.
2. If increasing negative camber, remove material from the outside of the lower strut hole.
3. If decreasing negative camber, remove material from the inside of the lower strut hole.
