Torrent AWD V6-3.6L (2008)
Coolant Line/Hose: Service and Repair
Heater Inlet Pipe Replacement
Heater Inlet Pipe Replacement (RPO LY7) (3.6L)
Removal Procedure
1. Partially drain the cooling system. Refer to Cooling System Draining and Filling (LNJ Static Fill) (See: Engine, Cooling and Exhaust/Cooling
System/Service and Repair)Cooling System Draining and Filling (LNJ GE 47716 Fill) (See: Engine, Cooling and Exhaust/Cooling
System/Service and Repair)Cooling System Draining and Filling (LY7 Static Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service
and Repair)Cooling System Draining and Filling (LY7 GE 47716 Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair) .
2. Remove the heater pipe inlet hose (1) from the heater inlet pipe.
3. Remove the heater inlet pipe housing bolts (1).
4. Remove the housing.
5. Remove the heater inlet pipe housing seal. Discard seal.
