Torrent AWD V6-3.6L (2008)
8. Disconnect the power steering cooler pipe fitting (1) from the power steering gear.
9. Unclip all power steering cooler pipe routing brackets.
10. Remove the power steering cooler pipe from the vehicle.
Installation Procedure
1. Position the power steering cooler pipe to the vehicle.
2. Reconnect all power steering cooler pipe routing brackets to the vehicle.
Notice: Refer to Fastener Notice .
3. Connect the power steering cooler pipe fitting (1) to the power steering gear.
Tighten to 25 N.m (18 lb ft).
