Torrent AWD V6-3.6L (2008)
Installation Procedure
1. Position the steering gear inlet hose to the vehicle.
Notice: Refer to Fastener Notice .
Important: Hand tighten the power steering gear inlet hose fittings before finalizing the torques.
2. Connect the power steering gear inlet hose fitting (1) to the steering gear.
Tighten the fitting to 25 N.m (18 lb ft).
3. Connect the power steering gear inlet hose fitting (1) to the power steering pump.
Tighten the fitting to 25 N.m (18 lb ft).