Torrent AWD V6-3.6L (2008)
3. Install the nub of the J 41239-1A on the transaxle cooler line seal.
4. Tap the new transaxle cooler line seal into the case bore.
5. Install the transaxle oil cooler line assembly to the transaxle.
Notice: Refer to Fastener Notice .
6. Install the transaxle oil cooler line assembly nut.
Tighten the transaxle cooler line retaining nut to 9 N.m (80 lb in).
7. Lower the vehicle.
Important: DEXRON(R) VI automatic transmission fluid is not compatible with this transaxle. If DEXRON(R) VI ATF is used,
transaxle failure will result. This transaxle uses GM T-IV fluid P/N 88900925.
8. Add fluid to the transaxle. Refer to Transmission Fluid Check (See: Testing and Inspection/Component Tests and General Diagnostics/AF33-5 -
Automatic Transaxle/Transmission Fluid Check) procedure.
9. Start the engine and check for leaks.
