Torrent AWD V6-3.6L (2008)
Installing the replacement seal to the proper depth is critical. Use the DT-48078 - Inner Drive Shaft Seal installer with a J 8092 - Driver Handle to install
the seal 2.8 mm (0.11 in) (a) from the end of the input shaft. Refer to the Front Drive Axle Inner Shaft Seal Replacement procedure in SI.
Parts Information
Warranty Information
For vehicles repaired under warranty, use the table above.
Disclaimer
Technical Service Bulletin # 08-07-30-009B
Date: 080501
A/T - 4T80E, Slips in Gear/L/H Axle Seal Leaks
TECHNICAL
Bulletin No.: 08-07-30-009B
Date: May 01, 2008
Subject:
HYDRA-MATIC(R) Front Wheel Drive 4T80-E (MH1) Left Front Axle Seal Leak, Transmission Slips in Gear (Replace Third Clutch Housing with
Revised Service Part)
Models:
2001-2008 GM Passenger Cars