Torrent FWD V6-3.4L (2007)
2. Install a new gasket to the valve rocker arm cover. Ensure the gasket is properly seated in the groove of the valve rocker arm cover.
Notice: Refer to Fastener Notice .
3. Install the valve rocker arm cover.
Tighten the bolts to 10 N.m (89 lb in).
4. Connect the PCV fresh air pipe (1) to the right valve rocker arm cover.
5. Install the ignition control module bracket with the ignition control module and spark plug wired still attached.
6. Install the generator bracket.
7. Install the fuel injector sight shield.