Torrent FWD V6-3.4L (2007)
Engine Accessory Bracket: Service and Repair
Generator Bracket/Engine Lift Bracket Replacement
Removal Procedure
1. Remove the generator.
2. Remove the drive belt tensioner.
3. Remove the generator bracket bolts.
4. Remove the generator bracket.
Installation Procedure
1. Install the generator bracket.
Notice: Refer to Fastener Notice.
2. Install the generator bracket bolts.
Tighten the generator bracket bolts in the sequence shown to 50 N.m (37 lb ft).
3. Install the drive belt tensioner.
4. Install the generator.
