Torrent FWD V6-3.4L (2007)
12. Position the J 28467-7A lift hook to the rear engine lift bracket (2).
13. Tighten the J 28467-34 wing nut (1) until all free slack is removed from the J 28467-7A bolt hook.
Important: If 58 cm (23 in) length engine support cross bar is not available it may be necessary to remove the vehicle hood for additional
clearance if a longer cross bar is to be substituted.
14. Position a 58 cm (23 in) engine support fixture cross bar (3) longitudinally with J 36462-A leg assembly (4) next to the front engine lift bracket.
15. Install a J 28467-1A clamp to secure the longitudinal mounted cross bar to the transverse mounted cross bar.
16. Insert a J 28467-7A lift hook through a J 28467-6 bracket and install a J 28467-34 wing nut.
