Torrent FWD V6-3.4L (2007)
17. Install the lift hook and bracket assembly (1) to the longitudinal mounted cross bar (2).
18. Position the J 28467-7A bolt hook (1) to the front engine lift bracket.
19. Tighten the J 28467-34 wing nut (2) until all free slack is removed from the J 28467-7A lift hook (1).
20. Evenly tighten both wing nuts until the engine weight is supported by the engine support fixture and no longer carried by the engine mounts.
Notice: Refer to Fastener Notice .
21. After removing the engine support fixture, replace the temporary strut studs with the original strut bolts.
Tighten the studs to 25 N.m (18 lb ft).
