Torrent FWD V6-3.4L (2007)
Important: All gasket mating surfaces must remain free of oil and foreign material. Refer to Sealers, Adhesives, and Lubricants for the
correct part number to use to clean surfaces.
Important: Do not apply room temperature vulcanizing (RTV) sealer to the engine block prior to the installation of the manifold gaskets.
RTV sealer is not to be placed under the lower intake manifold gaskets.
1. Install the lower intake manifold gaskets.
2. Install the rocker arms and push rods.
3. Install the lower intake manifold seals.
4. With the seals in place, apply a small drop 8-10 mm (0.31-0.39 in) of RTV sealer.
5. Install the lower intake manifold to the engine.
Notice: Maximum gasket performance is achieved when using new fasteners, which contain a thread-locking patch. If the fasteners are not
