Torrent FWD V6-3.4L (2007)
on the J 45404.
7. Tighten the transaxle range switch bolt and stud.
Tighten the bolt and stud to 25 N.m (18 lb ft).
8. Remove the J 45404 from the manual shaft.
9. Connect the electrical connectors (3, 5) to the transaxle range switch.
10. Install the transaxle range switch lever.
11. Install the battery tray.
12. After installing and adjusting the switch, verify the engine only starts in park (P) or neutral (N). If the engine starts in any other position, readjust
the switch. Refer to Transaxle Range Switch Adjustment.
