Torrent FWD V6-3.4L (2007)
Notice: Do not allow the absorber rod to rotate during disassembly/reassembly. Use hand tools to keep the absorber rod from rotating. If air tools
are used, and the rod is allowed to rotate, damage to the absorber may occur.
3. Use the J 42991 or equivalent hand tools to remove the strut shaft nut.
Important: Leave the spring in the spring compressor.
4. Lower the strut from the spring assembly.
Notice: Do not handle the top mount assembly by the plastic portion. Handle the top mount assembly by the metal portion when
removing/installing the top mount from/to the strut assembly. Holding the top mount assembly by the plastic portion may loosen the snap fit of the
bearing components and cause the bearing to fall apart.