Torrent FWD V6-3.4L (2007)
1. Install the transaxle shift control bracket.
Notice: Refer to Fastener Notice.
2. Install the transaxle shift control bracket.
Tighten the bolts to 25 N.m (18 lb ft).
3. Secure the shift control cable to the bracket. An audible snap will be heard when properly installed.
4. With the transaxle range switch lever in neutral (N), attach the shift control cable end fitting onto the ball stud of the transaxle range switch lever.
An audible snap will be heard when the shift control cable is properly installed.
5. Install the battery tray.
