pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 10659 > < Initial Inspection and Diagnostic Overview
Page 1
background image

Drive/Propeller Shaft: Symptom Related Diagnostic Procedures

- Symptoms - Propeller Shaft

Symptoms - Propeller Shaft

Strategy Based Diagnostics

Review the system operations in order to familiarize yourself with the system functions. Refer to Propeller Shaft Description and Operation, Transfer
Case Description and Operation for the NVG900 transfer case, Differential Case General Description, and Differential Carrier Assembly Description in
this service data. All diagnosis on a vehicle should follow a logical process. Strategy based diagnostics is a uniform approach for repairing all systems.
The diagnostic flow may always be used in order to resolve a system problem. The diagnostic flow is the place to start when repairs are necessary. For a
detailed explanation, refer to Strategy Based Diagnosis. See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based
Diagnosis

Visual/Physical Inspection

*

Inspect for aftermarket devices which could affect the operation of the vehicle. Refer to Checking Aftermarket Accessories in Diagnostic Aids. 
See: Testing and Inspection/Component Tests and General Diagnostics

Important: The constant velocity (CV) joint is not serviceable. If the boot is torn or the joint is worn or damaged, replace the propeller
shaft as an assembly.

*

Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
-

Inspect the CV joint boot for rips or cracks.

-

Rotate the CV joint to inspect for binding.

-

Inspect the CV joint for grease or oil leakage.

*

Verify the exact operating conditions under which the concern exists. Note factors such as speed, road conditions, ambient temperature, and other
specifics.

*

Compare the driving characteristics or sounds, if applicable, to a known good vehicle and make sure you are not trying to correct a normal
condition.

Intermittent

Test the vehicle under the same conditions that the customer reported in order to verify the system is operating properly.

Symptom List

Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:

*

Roughness or Vibration

*

Ping, Snap, or Click Noise

*

Knock or Clunk Noise

*

Scraping Noise

*

Squeak Noise

*

Shudder on Acceleration at Low Speed

Knock or Clunk Noise

Knock or Clunk Noise

Knock Or Clunk Noise

Ping, Snap, or Click Noise

Initial Inspection and Diagnostic Overview|Page 10659 > < Initial Inspection and Diagnostic Overview