Torrent FWD V6-3.4L (2007)
1. Apply GM T-IV automatic transaxle fluid GM P/N 88900925 to the new output speed sensor O-ring (1).
2. Install the new output speed sensor O-ring (1) onto the output speed sensor (2).
3. Install the output speed sensor (2) into the transmission case assembly.
Notice: Refer to Fastener Notice.
4. Install the output speed sensor bolt (3).
Tighten the bolt to 6 N.m (53 lb in).
5. Connect the wiring harness (2) to the output shaft speed sensor.