Trans Sport V6-3800 3.8L (1994)
Trunk / Liftgate Lock: All Technical Service Bulletins
Liftgate - Loss of Locking Feature/Non-Power Locks
Group Ref.: Body
Bulletin No.: 331068
Date: December, 1993
SUBJECT:
LIFTGATE - LOSS OF LOCKING FEATURE/NON-POWER LOCKS (INSTALL POWER DOOR LOCK ACTUATOR)
MODELS:
1992-94 CHEVROLET LUMINA MINIVAN
1992-94 OLDSMOBILE SILHOUETTE
1992-94 PONTIAC TRANS SPORT
CONDITION:
Some customers may comment that the liftgate does not lock.
CAUSE:
The lock cylinder lock out pin may be loose or missing (See Illustration).
CORRECTION:
Install power door lock actuator, P/N 10242895, to correct locking feature following procedure below.
1.
Remove trim panel.
2.
Remove lock plate assembly.
3.
Remove lock cylinder retaining clip and discard clip.
4.
Install power door lock actuator P/N 10242895.
5.
Cut the electrical connector and wire from the actuator and discard.
6.
Insure that the actuator's wire retaining clip does not overlap the key cylinders return spring.
7.
Cycle the key cylinder in the lock direction (counterclockwise) to insure the actuator's pin is engaged.
8.
Reinstall lock plate and trim panel.
PART AVAILABILITY:
Parts are currently available from GMSPO.
