Trans Sport V6-3800 3.8L (1994)
Alignment: Service and Repair
Front Toe Adjustment
Fig. 2 Toe-in Adjustment
1. Loosen locknut on tie rod ends, Fig. 2.
2. Ensure boot seals do not twist, set steering wheel in a straight-ahead position, and loosen jam nuts on tie rod ends.
3. Rotate inner tie rod end to obtain correct toe angle.
4. After adjustment has been completed according to recommended specifications, check that the number of threads showing on each tie rod is nearly
equal.
5. Ensure tie rod ends are square, then tighten to specification.