Vibe L4-1.8L (2008)
1. Install the following to the HVAC control unit:
*
The lamp bulbs
*
The mode control and temperature control knobs
*
The electrical connector
*
The mode control cable
*
The temperature control cable
*
The A/C cable
2. Install the HVAC control unit to the instrument panel.
3. Install the center console and heater control trim panel (1). Secure the panel with the screw.
4. Install the center knob to the HVAC control unit.
5. Adjust the cables as necessary, refer to the following:
*
Temperature Control Cable Adjustment (See: Air Door/Air Door Cable/Adjustments)
*
Mode Linkage Adjustment (See: Air Door/Air Door Actuator / Motor/Adjustments)
6. Install the radio. Refer to Radio Replacement (See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Radio/Stereo/Service
and Repair/Removal and Replacement/Radio Replacement).