Vibe L4-1.8L (2008)
13. Connect the fuel sender electrical connector (2) to the fuel sender assembly.
14. Add fuel to the fuel tank.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
15. Connect the negative battery cable.
Tighten the retainer for the negative battery cable terminal to 15 N.m (11 lb ft).
16. Pressurize the fuel system and check for leaks.
17. Install the access panel (1) to the rear seat floor panel (3).
18. Secure the access panel to the body with 4 bolts.
Tighten the 4 bolts to 6 N.m (53 lb in).
19. Relocate the carpet under the ride side seat area and the right sill plate area.
20. Install the sill plate to the right side door opening.
21. Lower the rear seat bottom cushion (1) and secure with 2 bolts (2).
Tighten the 2 bolts to 41 N.m (30 lb ft).
