Vibe L4-1.8L (2008)
3. Remove the insulation.
4. For sealed terminals only, align the seal with the end of the cable insulation.
5. Position the strip in the terminal.
For sealed terminals, position the strip and seal in the terminal.
6. Hand crimp the core wings.
7. Hand crimp the insulation wings.
For sealed terminals, hand crimp the insulation wings around the seal and the cable.
8. Solder all of the hand crimp terminals excepting Micro-Pack 100.64 size. Soldering Micro-Pack 100 World terminals may damage the terminal.
Sumitomo Connectors
Sumitomo Connectors
Tools Required
J-38125 Terminal Repair Kit
Terminal Removal Procedure
1. Slide the lever lock forward while pressing down on the lever lock release tab.
