Vibe L4-1.8L (2008)
Notice: Refer to Component Fastener Tightening Notice .
2. Tighten the HO2S 1.
Tighten the HO2S 1 to 44 N.m (32 lb ft).
3. Connect the electrical connector (2) of the HO2S 1.
4. Install the engine cover (1).
5. Secure the engine cover (1) with the 2 fasteners.
Tighten the two fasteners to 7 N.m (62 lb in).
6. Install the 2 plastic retainers.