Vibe L4-1.8L VIN L (2003)
Speaker: Service and Repair
Speaker Replacement - Front Upper
SPEAKER REPLACEMENT - FRONT UPPER
REMOVAL PROCEDURE
1. Remove the front door trim panel.
2. Disconnect the speaker electrical connector (3).
3. Remove the 2 nuts (2) from the door.
4. Remove the front upper door speaker (1) from the vehicle.
INSTALLATION PROCEDURE
1. Install the speaker (1) to the door.
2. Secure the speaker with 2 nut ((2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the speaker nuts to 8.0 N.m (71 lb in).
