Vibe L4-1.8L VIN L (2003)
1. Assemble the upper and lower fascias with the 10 screws.
2. Install the grilles. Refer to Fascia Grille Replacement (Upper) (See: Fascia Grille Replacement (Upper))Fascia Grille Replacement (Lower) (See:
Fascia Grille Replacement (Lower)) .
3. Position the fascia to the vehicle.
4. Install the screws (4) of the upper Fascia (2).
5. Install the push-in the retainers (3) starting at the center, to the front upper bumper fascia .
Notice: Refer to Fastener Notice in Cautions and Notices.
6. Install the bolts (1) to the front fascia (2) at the front fenders.
Tighten the front fascia bolts to 2 N.m (18 lb in).
7. Install the fog lamps. Refer to Fog Lamp Replacement - Front in Lighting Systems.
8. Install the front fender liners. Refer to Wheelhouse Panel Replacement (See: Fender/Front Fender/Front Fender Liner/Service and Repair) in
Body Front End.
9. Install the front fascia extensions, if removed. Refer to Fascia Extension Replacement - Front (See: Fascia Extension Replacement - Front) in
Bumpers.
