Vibe L4-1.8L VIN L (2003)
1. Instal the remote control door lock receiver (2) to the mounting bracket (1), if removed.
2. Install the remote control door lock receiver (1) to the vehicle.
3. Install the bolt (3) to the door lock receiver (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the remote control door lock receiver bolt to 10 N.m (89 lb in).
4. Connect the remote control door lock receiver electrical connector (2).
5. Install the right upper quarter panel trim.
6. Connect the negative battery cable.
7. Reprogram the remote control door lock receiver, if necessary. See: Testing and Inspection/Programming and Relearning