Vibe L4-1.8L VIN L (2003)
Parking Brake Cable: Service and Repair
Park Brake Cable Replacement (Front)
Park Brake Cable Replacement - Front
Removal Procedure
1. Remove the rear floor console. Refer to Console Replacement - Rear Floor in Instrument Panel, Gages, and Console.
2. Remove the park brake lever (1). Refer to Park Brake Lever Assembly Replacement. See: Parking Brake Lever/Service and Repair
3. If the vehicle has front-wheel drive, complete the following steps:
3.1. Remove the catalytic converter. Refer to Catalytic Converter Replacement (AWD) or Catalytic Converter Replacement (2WD) in Engine
Exhaust.
3.2. Remove the 3 nuts and the front floor forward heat shield.
3.3. Remove the 2 nuts and the front floor center heat shield.
4. Remove the front park brake cable (9) from the equalizer (8).