Vibe L4-1.8L VIN L (2003)
5. Disconnect the cruise control servo electrical connector (3).
6. Remove the following components from the vehicle:
-
The 2 cruise control servo mounting bolts (2)
-
The cruise control servo (1) with the bracket attached
INSTALLATION PROCEDURE
1. Install the cruise control servo (1) and bracket to the vehicle. Secure the servo and bracket with the 2 bolts (2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the cruise control servo mounting bolts to 6.0 N.m (52 lb in).
2. Connect the cruise control servo electrical connector (3).