Vibe L4-1.8L VIN L (2003)
8. Remove the fastener retaining the rocker arm oil control solenoid valve to the cylinder head.
9. Remove the rocker arm oil control solenoid valve (1) and the O-ring (2) from the cylinder head.
INSTALLATION PROCEDURE
1. Install a new O-ring (2) and the rocker arm oil control solenoid valve (1) into the cylinder head.
2. Secure the rocker arm oil control solenoid valve with the one fastener.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the fastener to 9 N.m (80 lb in).
3. Connect the electrical connector to the solenoid valve.
4. Connect the PCV hose (1) and the PCV breather hose (2) to the engine.
5. Connect the EVAP hoses.