Vibe L4-1.8L VIN L (2003)
Tighten
Tighten the fastener to 9 N.m (80 lb in).
3. Connect the electrical connector (1) to the solenoid valve (2).
4. Connect the PCV breather hose (4) to the PCV breather pipe (3).
5. Install the PCV breather pipe (3), with a new gasket (2), to the cylinder head.
6. Secure the PCV breather pipe to the cylinder head with the two nuts (1).
Tighten
Tighten the fastener to 9 N.m (80 lb in).
7. Secure the lower portion of the PCV breather pipe (3) to intake manifold with the one bolt (5).
Tighten
Tighten the bolts to 24 N.m (18 lb ft).
8. Install the generator support brace to the intake manifold and secure with two bolts.
Tighten
Tighten the bolts to 29 N.m (21 lb ft).
