Vibe L4-1.8L VIN L (2003)
Fuel Pressure Release: Service and Repair
Fuel Pressure Gage Installation and Removal
TOOLS REQUIRED:
-
J 34730-1A Fuel Pressure Gage
-
J 42982 Fuel Pressure Gage Adapter
-
J 43178 Fuel Line Disconnect Tool
INSTALLATION PROCEDURE
1. Relieve the fuel pressure. Refer to Fuel Pressure Relief Procedure.
2. Remove the four fasteners from the engine cover (1).
3. Remove the engine cover (1) from the engine.
4. Remove the quick connect coupling cover of the fuel feed hose.
5. Using the J 43178 , disconnect the quick connect coupling of the fuel feed hose from the fuel feed pipe of the fuel rail. Use a shop towel in order
to catch any remaining fuel that may leak. Refer to Quick Connect Fitting(s) Service (Metal Collar).
6. Install the J 42982 between the fuel feed pipe of the fuel rail and of the fuel feed hose.
