Vibe L4-1.8L VIN L (2003)
8. Lean the radiator back and Remove the condenser.
INSTALLATION PROCEDURE
IMPORTANT: When installing a new condenser, add 60 ml (2.0 fl oz) of refrigerant oil to the refrigeration system.
1. Install the condenser to the vehicle.
2. Install new O-rings lubricated with mineral base 525 viscosity refrigerant oil.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Secure the condenser with the two bolts (1).
Tighten
Tighten the bolts (1) to 10 N.m (89 lb in).
4. Install the radiator support brackets. Secure each bracket with the bolts (2).
Tighten
Tighten the radiator support bracket bolts to 13 N.m (10 lb ft).