Vibe L4-1.8L VIN L (2003)
1. Install the fluid filter screen (2) to the valve body assembly. Secure the screen with 3 bolts.
^
Tighten all the fluid filter screen bolts to 10 Nm (89 inch lbs.).
2. Install the magnets in the fluid pan
3. Install the new transaxle fluid pan gasket and transaxle fluid pan to the transaxle. Secure with 18 bolts.
^
Tighten the transaxle fluid pan bolts to 5.3 Nm (48 inch lbs.).
4. Install the transaxle pan drain plug into the transaxle fluid pan.
^
Tighten the transaxle drain plug to 17 Nm (13 ft. lbs.).
5. Remove the drain pan from under the transaxle.
6. Install the left splash shield.
7. Lower the vehicle.
8. Refill the transaxle, as necessary.
