Vibe L4-1.8L VIN L (2003)
Auxiliary Power Outlet: Procedures
Accessory Power Receptacle ReplacementT - 115 Volt
ACCESSORY POWER RECEPTACLE REPLACEMENT - 115 VOLT AC - INSTRUMENT PANEL (I/P)
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Using a flat bladed tool, disengage the 3 upper clips (1) and the 2 lower clips (4) on the accessory power receptacle bezel (3).
3. Disconnect the electrical connector.
4. Disengage the 2 clips (1) on the accessory power receptacle (2).
5. Remove the accessory power receptacle (2) from the bezel (3).
INSTALLATION PROCEDURE
