Vibe L4-1.8L VIN L (2003)
Tighten the PCM bracket fasteners to 3.2 N.m (28 lb in).
3. Connect the 4 PCM electrical connectors (1).
4. Swing the PCM (2) with bracket (3) up in position under the I/P.
5. Secure the PCM to the I/P with the 2 fasteners.
Tighten
Tighten the two fasteners to 9 N.m (80 lb in).
6. Install the I/P compartment door into the I/P.
7. Push in on both sides of the I/P compartment in order to release the safety catches and close the door.
8. Swing the close out panel (1) up under the PCM and secure with the two retainers.
9. Enable the SIR system. Refer to SIR Disabling and Enabling Zones in Restraint Systems.