Vibe L4-1.8L VIN L (2003)
Alarm Module: Description and Operation
KEYLESS ENTRY MODULE
When the keyless entry module receives a door lock or an unlock signal from the transmitter, the keyless entry module sends a message to the theft
module though the multi function alarm module. This message orders the multi function alarm module to perform the appropriate door lock/unlock
command. The theft module detects the message and performs one of the following functions:
-
Enters the armed initiated mode
-
Enters the ready to arm mode.
Disarmed State
The theft deterrent system will be in the disarmed state when the ignition switch is in the LOCK (off) position and all the doors are closed. The theft
module will request the security Indicator to remain OFF.
Arm Initiated State
The theft deterrent system will be in the arm initiated state when the ignition switch is in the LOCK (off) position, any door opens, and the theft
module detects a lock command from the keyless entry module. The theft module will request the security Indicator to remain ON.
Arm Delay State
The theft deterrent system will enter the arm delay state when the ignition switch is in the LOCK (off) position, the theft module receives a LOCK
command from the keyless entry module, and all the doors are closed. The theft module will request the security telltale to remain ON for 10 seconds.
Armed State
The theft deterrent system will enter the armed state after the 10 second delay of the arm delay state. The theft module monitors the inputs (listed
above) in order to determine whether to activate the alarm or to disarm the system.
