Vibe L4-1.8L VIN L (2003)
Tighten
Tighten the bolt to 42 N.m (31 lb ft).
3. Install the front seat shoulder belt guide trim cover (3).
4. Install the center pillar lower trim panel.
5. Install the front side door sill trim plate.
6. Install the rear side door sill trim plate.
7. Install the lower anchor bolt (5) to the front lower anchor.
Tighten
Tighten the bolt to 42 N.m (31 lb ft).
8. Install the front seat belt lower anchor bolt trim cover (4).
9. Enable the passenger seat SIR system. Refer to SIR Disabling and Enabling Zone 9 in Restraint Systems.
