Vibe L4-1.8L VIN L (2003)
Backup Lamp Switch: Service and Repair
MTN
Backup Lamp Switch Replacement
Removal Procedure
Notice: When removing or installing the backup lamp switch, do not use an open end wrench. Use only a socket in order to avoid damage to the
switch assembly.
1. Disconnect the backup lamp connector.
2. Remove the backup light switch assembly.
Installation Procedure
Notice: When removing or installing the backup lamp switch, do not use an open end wrench. Use only a socket in order to avoid damage to the
switch assembly.
Notice: Refer to Fastener Notice in Service Precautions.
